WiFi 360 Degree Camera Setup Instructions

Printable Instuctions

Step 1

Check your box for:

1 x WiFi 360 Degree Camera
1 x Antenna
1 x 3-Pin Plug Adapter
1 x Mounting Bracket
1 x Speaker
1 x Screw Pack (not pictured) 

You will also require a Phillips screwdriver.

If you have purchased an SD card for recording footage to an SD card, continue to Step 2. If you are not using an SD card, skip to Step 3.

Step 2

SD Card insertion:

A.  Use a screwdriver to carefully remove the back access.
B. Insert an SD card as shown below, and this will gently click into place.
C. Replace the back access panel, taking care to ensure the black rubber seal is totally straight and it is securely fastened for moisture resistance. 

Step 3

Camera mount attachment:

A. Screw the three small bolt screws into the black mounting bracket.
B. Feed the camera cables through the mounting bracket.
C. Orientate the mount so it is in line with the arrow on the camera body.
D. Tighten the three bolts to securely fix the mounting bracket in position.

Step 3B (above). Step 3C & 3D (below).

Step 4

Antenna attachment:
A. Carefully screw the one antenna into place, making sure to ensure it is tightly screwed into place.

Step 5

Power on your new camera:

A. There are four cables coming out the back of the camera (as below). Connect the power cable to the power lead coming out the back of camera. This will be the 3-pin plug adapter if powering the camera via mains or this will be a 12V battery connection cable if powering the camera via a 12V battery. 
B. Hold the camera by the mount and plug into power (the camera will rotate during the start-up process and to prevent damage, it is best to hold the camera by the mount).
C. Connect the black speaker to the RCA connector lead coming out the camera.

Step 6

Connecting your camera to the CamHiPro app:

A. Use your mobile phone to access the App / Google Play store and download a free app called ‘CamHipro’.
B. Once downloaded, open CamHipro and give it full permissions.
C. Use your mobile to search for nearby WiFi networks.
D. Connect to WiFi network:
Name: IPCAM****
Password: 01234567
This connects your mobile to the localised WiFi network emitted from the WiFi 360 Camera.
E. The following steps can be used to connect your WiFi 360 to the CamHipro app:

1. Open CamHipro and select ‘Add Camera’

2. Select ‘IP Camera’

3. Select ‘Device in Use’

4. Select ‘Search nearby devices’

5. Select your camera from the device list

6. Select ‘Add to’

7. Name your camera and select ‘confirm’

8. Wait for 10-15 seconds for your camera to connect

Step 7

Connecting your camera to your existing Wi-Fi network:
A. Return to the CamHipro app home page.
B. Tap the settings cog shown in the bottom right-hand corner, circled below in red.

C. The following steps can be used to connect your 360 Camera to your existing WiFi network:

1. Select 'wireless settings'

2. Select your existing WiFi network from the list

3. Enter your WiFi password and select ‘Apply’

Step 8

Using the PTZ functions and viewing HD footage:
A. In order to move your 360 camera, place your finger in the centre of the screen and swipe in the direction you wish to move.
B. The camera defaults to SD when installed, tap SD to change to HD for a higher quality.

Your WiFi 360 Camera should now be connected to your existing WiFi network, and you’ll be able to view footage wherever you are using your mobile phone. Feel free to unplug your camera, mount it where you want to use it, and then reconnect to power.

Any questions regarding setup? Drop us an email at support@farmstream.co.uk, including your order number and a brief description of the problem, so we can get the best person to help figure out what is going wrong.